Samsung TV Black Screen Of Death Fixes

All may not be lost, and your viewing pleasure may be saved

Samsung TV Black Screen Of Death

Last Updated on

If you have a Samsung TV, you may have experienced the well-known Samsung TV “black screen of death”. This is effectively when your TV is powered on and “working” but you cannot see a picture. 

This can be very frustrating and sometimes difficult to know how to fix it. So we’ve compiled a handy guide for you to help you solve this problem and get back to watching your favorite shows. 

If your Samsung TV is showing the black screen of death – here’s what you need to know. 

What Causes The Samsung TV Black Screen of death issue?

The most common cause of the black screen of death with a Samsung smart TV is that there is no signal coming from the source device (e.g., cable box or satellite receiver). 

If you are using an HDMI cable to connect your Samsung smart TV to your cable box or satellite receiver, make sure that the cable box or satellite receiver is connected to the correct port on the back of your TV. 

If you are using an optical connection such as RCA cables, make sure that the RCA cables are plugged into the right ports on the back of your television. 

However, there are other reasons why you may be seeing the black screen of death, and these are:

Wrong Input

Your Samsung TV may be set on the incorrect input. Make sure that the input settings match the input devices in your home. 

Firmware Update Required

You may need to update your firmware, or during the update, there was a problem. You can normally resolve this by unplugging the TV, waiting 30 seconds, and plugging it back in. Next, update your firmware – but ensure your TV is connected to your Wi-Fi.

TV Signal Weakness

Make sure that your TV is receiving a strong enough signal from the source device. You can check this by looking at the strength meter on your TV. 

Make sure that the antenna/cable box/satellite dish is properly installed and pointing towards the sky. 

It’s On Sleep Or Power Saver Mode

Turn off power saving mode or turn off sleep mode on your TV. 

Hardware Problem Or Damage

It may be an internal problem such as faulty circuitry. If this is the case, you’ll need to have it looked at by a professional or buy a new TV.

How To Fix The Black Screen Of Death For Your Samsung Smart TV

There are many ways to fix the black screen of death for your Samsung smart TV. We’ll go through them below.

1

Connect An External Monitor

One way to fix the black screen issue with a Samsung smart TV would be to use an external monitor.

Step

1

Connect the HDMI output of your Samsung TV to the HDMI input of your monitor.

Step

2

Switch your TV over to the HDMI input of the monitor.

Now, you should be able to watch your TV again.

2

Use Another Source Device

Another solution would be to use another source device. For example, you could use a Roku player instead of your cable box.

3

Check Your Antenna Connection

Another thing you can do is to check the connection between your antenna and your TV.

4

Reset the TV

A final option would be to reset your TV.

Step

1

Press and hold ‘Power’, ‘Menu’ and ‘OK’ buttons until the light turns green.

Step

2

Press the OK button twice when the light turns green

This will clear all the information stored in the memory of your TV. After doing this, you’ll see the main menu page again.

If none of these work, then try contacting Samsung Customer Support. They might be able to help you out.

The Bottom Line

The dreaded black screen of death can be irritating, but it’s often simple to resolve. Hopefully, we’ve provided you with some handy tips to fix your Samsung TV black screen of death and get you back to watching your favorite things!